Comments for Foxykeep on Android http://android.foxykeep.com Thu, 09 Feb 2012 08:03:02 +0000 hourly 1 http://wordpress.org/?v=3.3.1 Comment on New Android Dead Zebra Figurines : Big Box edition by Foxykeephttp://android.foxykeep.com/figurines/new-android-dead-zebra-figurines-big-box-edition/comment-page-1#comment-3773 Foxykeep Thu, 09 Feb 2012 08:03:02 +0000 http://android.foxykeep.com/?p=877#comment-3773 Ok thx for the help. I'll check there Ok thx for the help. I’ll check there

]]> Comment on New Android Dead Zebra Figurines : Big Box edition by dahem0nhttp://android.foxykeep.com/figurines/new-android-dead-zebra-figurines-big-box-edition/comment-page-1#comment-3772 dahem0n Thu, 09 Feb 2012 07:11:19 +0000 http://android.foxykeep.com/?p=877#comment-3772 You can find Rusty in KidRobot forums cheaper than in eBay You can find Rusty in KidRobot forums cheaper than in eBay

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by Foxykeephttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3669 Foxykeep Mon, 23 Jan 2012 18:53:39 +0000 http://android.foxykeep.com/?p=802#comment-3669 The problem I think is that your library is double referenced. Once in your lib project and another time in your main project. So remove it from your main project and you'll have access to it from your lib project. The problem I think is that your library is double referenced. Once in your lib project and another time in your main project. So remove it from your main project and you’ll have access to it from your lib project.

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by vinayhttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3664 vinay Mon, 23 Jan 2012 10:11:30 +0000 http://android.foxykeep.com/?p=802#comment-3664 I have a Library project which uses APIs from jar. When I reference this Library project from an application which also uses the APIs from the same jar, I'm getting above error message. How would I solve it?? I have a Library project which uses APIs from jar. When I reference this Library project from an application which also uses the APIs from the same jar, I’m getting above error message. How would I solve it??

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by zachhttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3588 zach Sun, 15 Jan 2012 02:48:17 +0000 http://android.foxykeep.com/?p=802#comment-3588 Same issue, thank you so much! Same issue, thank you so much!

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by Michael Littlehttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3525 Michael Little Sun, 08 Jan 2012 18:55:41 +0000 http://android.foxykeep.com/?p=802#comment-3525 After days of searching and trying different suggested fixes, this was the only thing that worked for me. Thanks so much for posting this. After days of searching and trying different suggested fixes, this was the only thing that worked for me. Thanks so much for posting this.

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by avollmerhttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3215 avollmer Wed, 14 Dec 2011 16:13:30 +0000 http://android.foxykeep.com/?p=802#comment-3215 Breno: I had this same problem occur, even after deleting all of the references. If you're using eclipse, you need to modify the references in the project itself; Right click your project, go to properties, then go to "Project References". Start unchecking. I don't know why but ADT does use this for dex. Breno:

I had this same problem occur, even after deleting all of the references. If you’re using eclipse, you need to modify the references in the project itself; Right click your project, go to properties, then go to “Project References”. Start unchecking.

I don’t know why but ADT does use this for dex.

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by Devizorhttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-3057 Devizor Thu, 01 Dec 2011 13:45:34 +0000 http://android.foxykeep.com/?p=802#comment-3057 Thank you!!!! Thank you!!!!

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by Brenohttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-2876 Breno Wed, 16 Nov 2011 15:24:15 +0000 http://android.foxykeep.com/?p=802#comment-2876 Hey this since my case is a little bit different I'm still having the "already added" problem. Here's the scenario: I have a MAIN_PROJECT that uses libraries A B and C. And also, A uses B. So I add B to A, and A and C to the MAIN_PROJECT... This still causes the already added problem. Anyone? Hey this since my case is a little bit different I’m still having the “already added” problem. Here’s the scenario: I have a MAIN_PROJECT that uses libraries A B and C. And also, A uses B. So I add B to A, and A and C to the MAIN_PROJECT…
This still causes the already added problem.
Anyone?

]]> Comment on How to fix the “Conversion to Dalvik format failed with error 1″ with ADT 14 by Janos Birohttp://android.foxykeep.com/dev/fix-the-conversion-to-dalvik-format-failed-with-error-1-with-adt-14/comment-page-1#comment-2788 Janos Biro Sat, 05 Nov 2011 20:27:05 +0000 http://android.foxykeep.com/?p=802#comment-2788 If you use GreenDroid: using the GoogleAPI version of GreenDroid won't work because it refers to the normal GreenDroid project and it causes “Conversion to Dalvik format failed with error 1? with ADT 14.. of course it's a bug.. If you use GreenDroid: using the GoogleAPI version of GreenDroid won’t work because it refers to the normal GreenDroid project and it causes “Conversion to Dalvik format failed with error 1? with ADT 14.. of course it’s a bug..

]]>